Bu sayfa şu anda sizin dilinizde mevcut değildir. Google'ın Çeviri sistemini kullanarak
ulaşabilirsiniz. Bu hizmeti sağlamaktan sorumlu değiliz ve çeviri sonuçları tarafımızdan kontrol edilmemiştir.
Eğer daha fazla yardıma ihtiyaç duyarsanız lütfen bizim ile temasa geçiniz.
SEM-Raman gives you comprehensive in situ sample characterisation in a single system. Redefine convenience, efficiency and productivity by combining these two technologies.
Renishaw's structural and chemical analyser (SCA) interface brings the inVia™ Raman microscopes point measurement and mapping capabilities to scanning electron microscopes (SEM).
Raman + SEM
The inVia microscope and the SCA interface provide an in-SEM analytical technique that both complements light microscope-based Raman spectroscopy and overcomes the limitations of energy-dispersive x-ray spectroscopy (EDS), the traditional in-SEM analytical technique. With Renishaw's SEM-Raman system, you'll benefit from co-located morphological, elemental, chemical, physical and electronic analysis.
Use the SEM to generate high-resolution images of your sample and perform elemental analysis. Add the power of Raman to obtain chemical information and images. Identify materials and non-metals, even when they have the same stoichiometry.
The SCA and inVia are fully compatible with not only Raman but also photoluminescence (PL) and cathodoluminescence (CL) spectroscopies.
One combined system for co-located analysis
With one combined system, you save valuable time. You do not have to move your samples between two instruments and risk analysing the wrong sample region.
Both the inVia microscope and SEM can be operated as stand-alone systems, at the same time, without compromising the performance of either. You have a Raman system, a SEM system and a combined Raman-SEM system.
You can determine the spatial variations in stress/strain and characterise defects by using the SEM-SCAs optional in-SEM mapping stage. With this you can image the molecular and crystalline properties of complex materials.
Same place, same time
Have confidence in your data; simultaneously acquire Raman and SEM data from the same point on the sample without having to move it. This ensures analysis is rapid and that your data are representative.
Choose the best system
Renishaw's SCA interface can be added to your existing SEM. It is mounted on a port, so it does not require the SEM to be modified in any way. The SCA has been installed on SEMs from all major vendors, including:
- Thermo Fisher Scientific (FEI)
Find out more
Downloads: SEM-Raman system
Product note: Co-located SEM-Raman imaging system
Renishaw’s SEM-Raman system provides truly co-located analysis Renishaw’s SEM-Raman system is unique. You can simultaneously acquire both SEM (scanning electron microscope) and Raman data from the same area on the sample. You do not have to transfer the sample to a different measurement location or instrument; this ensures rapid truly correlative analysis. You will avoid the sample registration issues that can occur when moving samples between measurement locations.[407kB]
Product note: SCA - diamond composite analysis
Renishaw’s structural and chemical analyser unites two well-established technologies, scanning electron microscopy (SEM) and Raman spectroscopy, resulting in a powerful new technique which allows morphological, elemental, chemical, physical, and electronic analysis without moving the sample between instruments.[138kB]
Application note: A study of single-wall carbon nanotubes using Renishaw's structural and chemical analyser for scanning electron microscopy
Electron imaging and Raman spectroscopy are established techniques for viewing and analysing carbon nanotubes. Performing these two techniques usually requires the sample being transferred between a scanning electron microscope (SEM) and a Raman spectrometer. This application note illustrates the advantages of Renishaw’s structural and chemical analyser (SCA) for simultaneous secondary electron imaging and Raman spectroscopy of single-wall carbon nanotubes (SWNTs).[357kB]
Application note: SCA oxidation application note - cultural heritage
SEM-SCA analysis helps in the preservation of a corroding bronze statue of the Roman god Ares from the ancient city of Zeugma in Turkey.[354kB]
Application note: SCA oxidation application note - copper and steel
This note illustrates how the SEM-SCA can be used to study the corrosion of copper wire and nuclear reactor steel (four pages).[345kB]
Selecting the best system
Contact Renishaw's SEM experts and discuss your specific requirements.
Latest SEM user stories
Researchers at BRGM (the French Geological Survey in Orleans, France) study the physical, chemical, and structural properties of minerals. They use a co-located SEM-Raman system from Renishaw to provide comprehensivein situsample characterisation.
Combining Raman microscopy with scanning electron microscopy (SEM) to study inorganic and mineral samples at the Geological Institute of Romania, Bucharest
The Geological Institute of Romania use Renishaw's structural and chemical analyser (SCA) interface to bring the Raman analysis capabilities of the inVia™ confocal Raman microscope to their scanning electron microscope (SEM).