 | TSI arayüzleri
Bu sayfa şu anda sizin dilinizde mevcut değildir. Google'ın Çeviri sistemini kullanarak
otomatikleştirilmiş çeviriye
ulaşabilirsiniz. Bu hizmeti sağlamaktan sorumlu değiliz ve çeviri sonuçları tarafımızdan kontrol edilmemiştir.
Eğer daha fazla yardıma ihtiyaç duyarsanız lütfen
bizim ile temasa geçiniz.
 Interfaces for tool setting arms and probes for turning centres.
Tool setting interface options
| TSI 2 |
|
TSI 3 |
|
TSI 2-C |
|
TSI 3-C |
 Use with HPRA, HPPA |
|
 Use with HPMA, HPGA |
|
Use with HPRA, HPPA |
|
Use with HPMA |
| TSI 2 can be DIN rail mounted within the machine control cabinet. |
|
TSI 3 units are DIN rail-mounted and feature an 'Easy fit' location mechanism. |
|
As the TSI 2 but with Solid state relay (SSR) output for easier user configuration. |
|
As the TSI 3 but with Solid state relay (SSR) output for easier user configuration. | TSI 2 specification
| Specification |
|
| Principal application |
Hard-wired probing systems with HPRA and HPPA |
| Mounting |
DIN rail mounting |
| Outputs |
1. Probe status (no complement)
2. Position confirm signals (machine ready and arm ready) |
| Output signal format |
1. Unipolar active high probe status outputs (non configurable)
2. Unipolar active high confirm outputs for machine ready and arm ready positions (non configurable) |
| Other I/O |
Can be connected to either a standard single wire probe input or the four wire alternative.
Select any one output for single wire probe input or utilise all four inputs/outputs for four wire probe inputs. |
| Power supply |
18 V - 30 V dc, Imax = 50 mA not including output loading.
Fuse protected at 250 mA (FF) |
| TTL compatibility |
Not compatible |
| Inputs |
1. Inhibit
2. Probe select inputs |
| Input signal format |
1. Internally pulled down (2k4) ACTIVE HIGH
2. Internally pulled down (2k4) ACTIVE HIGH |
| Probe vibration filter |
A trigger delay circuit (6.5 ms) can be activated by reversing the brown and white wire connections to the TSI 2 (PL2-1 and PL2-3) |
TSI 3 specification
| Specification |
|
| Principal application |
Hard-wired probing systems with HPMA and HPGA. |
| Mounting |
DIN rail mounting |
| Outputs |
1. Probe status (no complement)
2. Position confirm signals (machine ready and arm ready) |
| Output signal format |
1. Unipolar active high probe status outputs (non configurable)
2. Unipolar active high confirm outputs for machine ready and arm ready positions (non configurable) |
| Other I/O |
Can be connected to either a standard single wire probe input or the four wire alternative.
Select any one output for single wire probe input or utilise all four inputs/outputs for four wire probe inputs. |
| Power supply |
Interface voltage supply (1, 13, 25) 18 V - 30 V dc, Imax = 100 mA not including output loading.
Motor voltage supply (10, 22, 11, 23) 24 V dc + 20% - 10%, Imax + 2.5 A for 4 s (worst case stall). Overcurrent and reverse connection protected.
Self-resettable |
| TTL compatibility |
Not compatible |
| Inputs |
1. Inhibit, Arm ready, Machine ready
2. Probe Select inputs2. Probe select inputs |
| Input signal format |
1. Internally pulled down (2k4) ACTIVE HIGH
2. Internally pulled down (2k4) ACTIVE HIGH |
| Probe vibration filter |
A trigger delay circuit (6.5ms) can be activated by reversing the brown and white wire connections to the TSI 3 (PL2-1 and PL2-3) |
TSI 2-C specification
| Specification |
|
| Principal application |
Hard-wired probing systems with HPRA and HPPA |
| Mounting |
DIN rail mounting |
| Outputs |
1. Probe status (N/O or N/C)
2. Position confirm signals (machine ready and arm ready) |
| Output signal format - voltage free SSR |
Probe status N/C or N/O, MRO and ARO N/O
Maximum current 40 mA
Maximum voltage 30 V
Outputs are protected by fuses (TE5) (f) 50mA |
| Other I/O |
Can be connected to either a standard single wire probe input or the four wire alternative.
Select any one output for single wire probe input or utilise all four inputs/outputs for four wire probe inputs. |
| Power supply |
18 V - 30 V dc, Imax = 50 mA not including output loading.
Fuse protected at 250 mA (FF) |
| TTL compatibility |
Not compatible |
| Inputs |
1. Inhibit
2. Probe select inputs |
| Input signal format |
1. Internally pulled down (2k4) ACTIVE HIGH
2. Internally pulled down (2k4) ACTIVE HIGH |
| Probe vibration filter |
A trigger delay circuit (6.5 ms) can be activated by reversing the brown and white wire connections to the TSI 2 (PL2-1 and PL2-3) |
TSI 3-C specification
| Specification |
|
| Principal application |
Hard-wired probing systems with HPMA. |
| Mounting |
DIN rail mounting |
| Outputs |
1. Probe status (N/O or N/C)
2. Position confirm signals (machine ready and arm ready) |
| Output signal format - voltage free SSR |
Probe status N/C or N/O, MRO and ARO N/O
Maximum current 40 mA
Maximum voltage 30 V
Outputs are protected by fuses (TE5) (f) 50mA |
| Other I/O |
Can be connected to either a standard single wire probe input or the four wire alternative.
Select any one output for single wire probe input or utilise all four inputs/outputs for four wire probe inputs. |
| Power supply |
Interface voltage supply (1, 13, 25) 18 V - 30 V dc, Imax = 100 mA not including output loading.
Motor voltage supply (10, 22, 11, 23) 24 V dc + 20% - 10%, Imax + 2.5 A for 4 s (worst case stall). Overcurrent and reverse connection protected.
Self-resettable |
| TTL compatibility |
Not compatible |
| Inputs |
1. Inhibit, Arm ready, Machine ready
2. Probe Select inputs2. Probe select inputs |
| Input signal format |
1. Internally pulled down (2k4) ACTIVE HIGH
2. Internally pulled down (2k4) ACTIVE HIGH |
| Probe vibration filter |
A trigger delay circuit (6.5ms) can be activated by reversing the brown and white wire connections to the TSI 3 (PL2-1 and PL2-3) | |
