REVO™
Bu sayfa şu anda sizin dilinizde mevcut değildir. Google'ın Çeviri sistemini kullanarak
otomatikleştirilmiş çeviriye
ulaşabilirsiniz. Bu hizmeti sağlamaktan sorumlu değiliz ve çeviri sonuçları tarafımızdan kontrol edilmemiştir.
Eğer daha fazla yardıma ihtiyaç duyarsanız lütfen
bizim ile temasa geçiniz.
 REVO is the first in a range of revolutionary products to offer 5-axis measurement capability and is designed to maximise CMM throughput whilst maintaining high system accuracy.
REVO uses synchronised motion and Renscan5™ measurement technology to minimise the dynamic effects of CMM motion at ultra high measurement speeds. This is achieved by letting the REVO head do the fast demanding motion while the CMM moves in a linear slow fashion.
The use of a flexible tip sensing probe system further adds to the systems' accuracy and flexibility. The removable probe system, used in conjunction with a low cost changer, provides added system flexibility. REVO system probe options
RSP2 scanning probe
 RSP2 is a dedicated lightweight tip-sensing probe for use on REVO systems, capable of 2D-scanning (x, y) and 3D-touch trigger measurement. The RSP2 has a universal body to which a number of different length stylus holders, with a maximum reach of 500mm, can be fitted.
More information about the RSP2 scanning probe.
RSP3 scanning probe
 RSP3 complements the RSP2 probe, providing the REVO system with 3D-scanning (x,y,z) and crank stylus capabilities. It is used for 3-axis scanning, such as with a fixed REVO head angle during measurement.
More information about the RSP3 scanning probe. Controller system
 The Renscan5® technology is embedded in Renishaw's UCC2 CMM controller which forms the basis of the 5-axis measurement system — 2 of these axes are rotary and at the CMM quill. Patented software capability within the UCC provides unique motion commands, synchronisation and 5-axis metrology capability.
In order to achieve the high scanning speeds it is essential the 5-axis measurement system has a fully integrated control loop. This is achieved using Renishaw's UCC2 and SPA2-2 system. Faster calibration
Calibration on traditional CMM systems consumes a considerable amount of time that could otherwise be used for part measurement. The unique calibration technique developed for REVO determines the actual head and probe geometry, allowing measurement in any position from a single operation, thus dramatically reducing calibration time.
More information about the faster calibration with REVO. REVO valve seat and guide measurement
 The measurement of valve seat and guides has traditionally been very challenging, involving time-consuming methods that often do not provide a sufficiently capable measurement.
REVO and Renishaw’s Renscan5 technology change this situation dramatically. It is now possible to collect very quickly large amounts of data, from which the analysis parameters for both the valve seat and the valve guide features can be calculated. The method performs exceptionally well in repeatability and reproducibility tests.
More information about the REVO valve seat and guide measurement and analysis. Extended warranty For peace of mind A 3-year warranty is available for your new CMM products during the first 3 months from purchase. Contact your vendor.
| 
